Vent-free gas fireplace · Empire

Empire VFD32FB0F Vent-Free Gas Fireplace

5,118 BTU/h vent-free gas fireplace

Heat output (maker)
5,118 BTU/h
Venting
Vent-Free
Dimensions (seller)
17.43"D x 34.5"W x 35.62"H
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

In short

Best suited to supplemental heat for one room.

Wins
5,118 BTU/h.
Gives ground
Adds moisture to the room.
Suits
Supplemental heat for one room.

Updated October 2026

What you get

The Empire VFD32FB0F Vent-Free Gas Fireplace is a vent-free gas fireplace rated by its maker at 5,118 BTU per hour.

At full fire it burns about 5 cubic feet of natural gas an hour (its 5,118 BTU/h divided by EIA's heat content for each fuel).

As a vent-free unit it burns room air and releases its exhaust and moisture into the room, so nearly all its heat stays indoors. Its manual sets a minimum room size for its BTU rating, and some local codes restrict vent-free appliances. Vent-free vs direct-vent.

Also on the listing: overall dimensions of 17.43 in (D) x 34.5 in (W) x 35.62 in (H).

The figures, from the maker

Each figure is the maker's or the listing's own, with its source marked. A figure the maker doesn't give is shown as not stated.

Model numberVFD32FB0FRetailer
Dimensions (seller)17.43"D x 34.5"W x 35.62"HRetailer
Mounting / installationScrewsRetailer
Heat output (maker)5,118 BTU/hRetailer
Features (seller)Energy EfficientRetailer
Model nameVFD32FB0FRetailer
VentingVent-FreeRetailer

Is it the right heater for the room?

Pick it when

  • Supplemental heat for one room
  • Homes with gas or propane

Pass on it when

  • Bedrooms and small rooms the manual excludes
  • Places where local code bans vent-free heaters

Where it wins, where it gives ground

Wins

  • 5,118 BTU/h
  • No chimney needed

Gives ground

  • Adds moisture to the room
  • Restricted by some local codes
  • Needs a gas line

Know before you install

  • Figures are the maker's own and are rated in the maker's conditions. Installation, venting, chimney, gas and electrical work follow the manual and local code, carried out by a qualified installer.

Heaters to weigh against it

Other gas stoves, fireplaces and inserts in the same heat range

Every gas stoves, fireplaces and inserts on one chart · All Empire models listed

Buying this model

The button opens this exact model's listing. Prices and stock change, and installation parts are usually sold separately; check the box contents and the manual's venting list before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions about this model

How much gas does the Empire VFD32FB0F Vent-Free Gas Fireplace use?
At full fire, about 5 cubic feet of natural gas an hour, from its 5,118 BTU/h rating and EIA's heat contents; lower settings use less.
Does the Empire VFD32FB0F Vent-Free Gas Fireplace need a vent or chimney?
No: it's vent-free. Its manual sets the minimum room size and other limits, and some local codes restrict vent-free heaters.

Bottom line

Best suited to supplemental heat for one room.