Wall or recessed · Dimplex

Dimplex SWM3520 Wall Electric Fireplace

Wall or recessed, 1,400 W

Heats up to (maker)
1,000 sq ft
Heat output (maker)
4,777 BTU/h
Wattage
1,400 W
Voltage
120 V
Material
Metal
Dimensions (seller)
5"D x 36"W x 17.3"H
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

In short

Pick it for wall-mounted ambience and heat.

Wins
4,777 BTU/h of heat.
Gives ground
Supplemental heat only.
Suits
Wall-mounted ambience and heat.

Updated October 2026

What you get

The Dimplex SWM3520 Wall Electric Fireplace is a wall or recessed with a 1,400-watt heater, which works out to about 4,777 BTU per hour (3.412 BTU per watt).

Its 1,400 watts means 11.7 amps on a household outlet and 1.4 kWh for each hour on high. The fuel cost calculator turns that into your hourly cost.

The maker says it heats up to 1,000 square feet; as with any 120-volt heater, read that as supplemental heat for one room.

Like most electric fireplaces the flame effect can run with the heater off, using far less power.

It mounts on or recesses into a wall; recessed installs need a framed opening and, for larger units, the wiring its manual specifies.

Because nothing burns, there's no chimney, vent or carbon monoxide to plan for.

Also on the listing: overall dimensions of 5 in (D) x 36 in (W) x 17.3 in (H), a shipping or unit weight of 29.1 lb and metal construction.

Warranty, per the listing: 90 days.

The figures, from the maker

Each figure is the maker's or the listing's own, with its source marked. A figure the maker doesn't give is shown as not stated.

Model numberSWM3520Retailer
PowerCorded ElectricRetailer
Dimensions (seller)5"D x 36"W x 17.3"HRetailer
MaterialMetalRetailer
Mounting / installationTabletop,Wall MountRetailer
Heat output (maker)4,777 BTU/hRetailer
Features (seller)CordedRetailer
Batteries2 AAA batteries required. (included)Retailer
Model nameWinslow 35" Wall-MountRetailer
Warranty90 days.Retailer
Product weight29.1 lbRetailer
Heats up to (maker)1,000 sq ftRetailer
Wattage1,400 WRetailer
Voltage120 VRetailer

Is it the right heater for the room?

Pick it when

  • Wall-mounted ambience and heat
  • Rooms where gas or wood can't go

Pass on it when

  • Heating a whole house
  • Circuits already near their limit

Where it wins, where it gives ground

Wins

  • 4,777 BTU/h of heat
  • No vent or chimney
  • Flame runs without heat

Gives ground

  • Supplemental heat only
  • Draws 11.7 A on high

Know before you install

  • Figures are the maker's own and are rated in the maker's conditions. Installation, venting, chimney, gas and electrical work follow the manual and local code, carried out by a qualified installer.

Heaters to weigh against it

Other electric fireplaces and stoves in the same heat range

Every electric fireplaces and stoves on one chart · All Dimplex models listed

Buying this model

The button opens this exact model's listing. Prices and stock change, and installation parts are usually sold separately; check the box contents and the manual's venting list before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions about this model

How much heat does the Dimplex SWM3520 Wall Electric Fireplace give?
About 4,777 BTU per hour on its 1,400-watt setting, since each watt gives 3.412 BTU per hour.
Can the Dimplex SWM3520 Wall Electric Fireplace share a circuit?
It draws about 11.7 amps at 120 volts on high, most of a 15-amp circuit; the manual says how to connect it.

Bottom line

Pick it for wall-mounted ambience and heat.