Wall or recessed ยท BINMIT

BINMIT BMEP70BM Wall Electric Fireplace

Wall or recessed, 750 W

Heat output (maker)
5,118
Wattage
750 W
Thermostat
adjustable thermostat
Material
Tempered Glass
Dimensions (seller)
4.06"D x 70"W x 14.96"H
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

In short

Built for wall-mounted ambience and heat.

Wins
2,559 BTU/h of heat.
Gives ground
Supplemental heat only.
Suits
Wall-mounted ambience and heat.

Updated October 2026

What you get

The BINMIT BMEP70BM Wall Electric Fireplace is a wall or recessed with a 750-watt heater, which works out to about 2,559 BTU per hour (3.412 BTU per watt).

Its 750 watts means 6.2 amps on a household outlet and 0.8 kWh for each hour on high. The fuel cost calculator turns that into your hourly cost.

Like most electric fireplaces the flame effect can run with the heater off, using far less power.

It mounts on or recesses into a wall; recessed installs need a framed opening and, for larger units, the wiring its manual specifies.

Electric fireplaces burn nothing, so they produce no carbon monoxide and need no vent, chimney or gas line.

Also on the listing: overall dimensions of 4.06 in (D) x 70 in (W) x 14.96 in (H) and tempered glass construction.

The figures, from the maker

Each figure is the maker's or the listing's own, with its source marked. A figure the maker doesn't give is shown as not stated.

Model numberBMEP70BMRetailer
PowerCorded ElectricRetailer
Dimensions (seller)4.06"D x 70"W x 14.96"HRetailer
MaterialTempered GlassRetailer
Mounting / installationWall MountRetailer
Heat output (maker)5,118Retailer
Features (seller)CordedRetailer
Model nameBMEP70BMRetailer
Wattage750 WRetailer
Thermostatadjustable thermostatRetailer

Is it the right heater for the room?

Pick it when

  • Wall-mounted ambience and heat
  • Rooms where gas or wood can't go

Pass on it when

  • Heating a whole house
  • Circuits already near their limit

Where it wins, where it gives ground

Wins

  • 2,559 BTU/h of heat
  • No vent or chimney
  • Flame runs without heat

Gives ground

  • Supplemental heat only
  • Draws 6.2 A on high

Know before you install

  • Figures are the maker's own and are rated in the maker's conditions. Installation, venting, chimney, gas and electrical work follow the manual and local code, carried out by a qualified installer.

Heaters to weigh against it

Other electric fireplaces and stoves in the same heat range

Every electric fireplaces and stoves on one chart

Buying this model

The button opens this exact model's listing. Prices and stock change, and installation parts are usually sold separately; check the box contents and the manual's venting list before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions about this model

How much heat does the BINMIT BMEP70BM Wall Electric Fireplace give?
About 2,559 BTU per hour on its 750-watt setting, since each watt gives 3.412 BTU per hour.
Can the BINMIT BMEP70BM Wall Electric Fireplace share a circuit?
It draws about 6.2 amps at 120 volts on high, most of a 15-amp circuit; the manual says how to connect it.

Bottom line

Built for wall-mounted ambience and heat.