Wall or recessed · Dimplex

Dimplex XLF50 Wall Electric Fireplace

Wall or recessed, 1,500 W

Heat output (maker)
5,118 BTU/h
Wattage
1,500 W
Voltage
120 V
Material
Ceramic
Dimensions (seller)
5.88"D x 50.25"W x 15.63"H
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

In short

Best suited to wall-mounted ambience and heat.

Wins
5,118 BTU/h of heat.
Gives ground
Supplemental heat only.
Suits
Wall-mounted ambience and heat.

Updated October 2026

What you get

The Dimplex XLF50 Wall Electric Fireplace is a wall or recessed with a 1,500-watt heater, which works out to about 5,118 BTU per hour (3.412 BTU per watt).

On a 120-volt outlet that draws about 12.5 amps, most of a standard 15-amp circuit, so other loads on the circuit can trip the breaker. Plug it straight into the wall as the manual directs.

Like most electric fireplaces the flame effect can run with the heater off, using far less power.

It mounts on or recesses into a wall; recessed installs need a framed opening and, for larger units, the wiring its manual specifies.

Electric fireplaces burn nothing, so they produce no carbon monoxide and need no vent, chimney or gas line.

Also on the listing: overall dimensions of 5.88 in (D) x 50.25 in (W) x 15.63 in (H) and ceramic construction.

The figures, from the maker

Each figure is the maker's or the listing's own, with its source marked. A figure the maker doesn't give is shown as not stated.

Model numberXLF50Retailer
Power240vRetailer
Dimensions (seller)5.88"D x 50.25"W x 15.63"HRetailer
MaterialCeramicRetailer
Mounting / installationBuilt InRetailer
Heat output (maker)5,118 BTU/hRetailer
Model nameXLF50Retailer
Wattage1,500 WRetailer
Voltage120 VRetailer

Is it the right heater for the room?

Pick it when

  • Wall-mounted ambience and heat
  • Rooms where gas or wood can't go

Pass on it when

  • Heating a whole house
  • Circuits already near their limit

Where it wins, where it gives ground

Wins

  • 5,118 BTU/h of heat
  • No vent or chimney
  • Flame runs without heat

Gives ground

  • Supplemental heat only
  • Draws 12.5 A on high

Know before you install

  • Figures are the maker's own and are rated in the maker's conditions. Installation, venting, chimney, gas and electrical work follow the manual and local code, carried out by a qualified installer.

Heaters to weigh against it

Other electric fireplaces and stoves in the same heat range

Every electric fireplaces and stoves on one chart · All Dimplex models listed

Buying this model

The button opens this exact model's listing. Prices and stock change, and installation parts are usually sold separately; check the box contents and the manual's venting list before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions about this model

How much heat does the Dimplex XLF50 Wall Electric Fireplace give?
About 5,118 BTU per hour on its 1,500-watt setting, since each watt gives 3.412 BTU per hour.
Can the Dimplex XLF50 Wall Electric Fireplace share a circuit?
It draws about 12.5 amps at 120 volts on high, most of a 15-amp circuit; the manual says how to connect it.

Bottom line

Best suited to wall-mounted ambience and heat.