Pellet stove · Cleveland Iron Works

Cleveland Iron Works F500485 Pellet Stove

Pellet stove, up to 3,000 sq ft, 29,501 BTU/h

Heats up to (maker)
3,000 sq ft
Heat output (maker)
29,501 BTU/h
Fuel
Pellet
Hopper
90 lb
Thermostat
Digital Thermostat
Material
Cast Iron
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

In short

Pick it for homes without a masonry chimney.

Wins
Heats up to 3,000 sq ft (maker).
Gives ground
Stops in a power cut without a backup.
Suits
Homes without a masonry chimney.

Updated October 2026

What you get

The Cleveland Iron Works F500485 Pellet Stove is a pellet stove that its maker rates at 29,501 BTU per hour and says heats up to 3,000 square feet.

Makers rate heating area in their own conditions, so read 3,000 square feet as a ceiling; the size calculator lists the closest fits for your space.

Its hopper holds 90 lb; refills depend on the heat setting you run.

Like nearly every pellet stove it needs household power for the auger, fans and controls; plan a backup if outages are common. What happens in an outage.

Also on the listing: overall dimensions of 31.1 in (D) x 27.84 in (W) x 33.42 in (H), a shipping or unit weight of 304.2 lb and cast iron construction.

Warranty, per the listing: 1 Year Limited.

The figures, from the maker

Each figure is the maker's or the listing's own, with its source marked. A figure the maker doesn't give is shown as not stated.

Model numberF500485Retailer
MaterialCast IronRetailer
Dimensions (seller)31.1"D x 27.84"W x 33.42"HRetailer
Product weight304.2 lbRetailer
Warranty1 Year LimitedRetailer
Heat output (maker)29,501 BTU/hRetailer
FuelPelletRetailer
Mounting / installationFloor MountRetailer
Heats up to (maker)3,000 sq ftRetailer
Hopper90 lbRetailer
ThermostatDigital ThermostatRetailer

Is it the right heater for the room?

Pick it when

  • Homes without a masonry chimney
  • Owners who want set-and-forget heat

Pass on it when

  • Frequent long power cuts without a backup
  • Owners who want to burn cordwood

Where it wins, where it gives ground

Wins

  • Heats up to 3,000 sq ft (maker)
  • 90 lb hopper
  • Feeds itself from the hopper
  • Thermostat control

Gives ground

  • Stops in a power cut without a backup
  • Burn pot needs regular cleaning

Know before you install

  • Figures are the maker's own and are rated in the maker's conditions. Installation, venting, chimney, gas and electrical work follow the manual and local code, carried out by a qualified installer.

Heaters to weigh against it

Other pellet stoves and inserts in the same heat range

Every pellet stoves and inserts on one chart · All Cleveland Iron Works models listed

Buying this model

The button opens this exact model's listing. Prices and stock change, and installation parts are usually sold separately; check the box contents and the manual's venting list before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions about this model

Does the Cleveland Iron Works F500485 Pellet Stove work without power?
No, not on its own: the auger and fans need electricity. A battery backup the maker allows, or a generator, keeps it running.
How long does a hopper last in the Cleveland Iron Works F500485 Pellet Stove?
It holds 90 lb. Higher heat settings empty it faster.

Bottom line

Pick it for homes without a masonry chimney.