What you get
The Pleasant Hearth VFS2-PH30DT Vent-Free Gas Stove is a vent-free gas stove that its maker rates at 30,000 BTU per hour and says heats up to 1,000 square feet.
Treat the 1,000 square feet as the maker's best case for an open, reasonably insulated space, and check it against your room before choosing.
At full fire it burns about 29 cubic feet of natural gas an hour (its 30,000 BTU/h divided by EIA's heat content for each fuel).
As a vent-free unit it burns room air and releases its exhaust and moisture into the room, so nearly all its heat stays indoors. Its manual sets a minimum room size for its BTU rating, and some local codes restrict vent-free appliances. Vent-free vs direct-vent.
Fuel, per the listing: Gas. Never connect a gas heater to a fuel it isn't set for.
Also on the listing: overall dimensions of 14.37 in (D) x 31.93 in (W) x 28.27 in (H), a shipping or unit weight of 78 lb and alloy steel, cast iron construction.
Warranty, per the listing: Manufacturer warranty.
The figures, from the maker
Each figure is the maker's or the listing's own, with its source marked. A figure the maker doesn't give is shown as not stated.
| Model number | VFS2-PH30DT | Retailer |
|---|---|---|
| Material | Alloy Steel, Cast Iron | Retailer |
| Dimensions (seller) | 14.37"D x 31.93"W x 28.27"H | Retailer |
| Product weight | 78 lb | Retailer |
| Warranty | Manufacturer warranty. | Retailer |
| Heat output (maker) | 30,000 BTU/h | Retailer |
| Fuel | Gas | Retailer |
| Mounting / installation | Freestanding | Retailer |
| Heats up to (maker) | 1,000 sq ft | Retailer |
| Venting | Vent Free | Retailer |
| Thermostat | Built-in Thermostat | Retailer |
| Blower | Blower | Retailer |
Is it the right heater for the room?
Pick it when
- Supplemental heat for one room
- Homes with gas or propane
Pass on it when
- Bedrooms and small rooms the manual excludes
- Places where local code bans vent-free heaters
Where it wins, where it gives ground
Wins
- 30,000 BTU/h
- No chimney needed
- Gas
Gives ground
- Adds moisture to the room
- Restricted by some local codes
- Needs a gas line
Know before you install
- Figures are the maker's own and are rated in the maker's conditions. Installation, venting, chimney, gas and electrical work follow the manual and local code, carried out by a qualified installer.
Heaters to weigh against it
Other gas stoves, fireplaces and inserts in the same heat range
- ProCom PC32VFC Gas Fireplace Insert
- Duluth Forge FNF300T Gas Fireplace Insert
- ProCom PCS150T Gas Fireplace Insert
- ProCom PC36VFC Gas Fireplace Insert
Every gas stoves, fireplaces and inserts on one chart · All Pleasant Hearth models listed
Buying this model
The button opens this exact model's listing. Prices and stock change, and installation parts are usually sold separately; check the box contents and the manual's venting list before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure
Questions about this model
How much gas does the Pleasant Hearth VFS2-PH30DT Vent-Free Gas Stove use?
Does the Pleasant Hearth VFS2-PH30DT Vent-Free Gas Stove need a vent or chimney?
Bottom line
Built for supplemental heat for one room.