What you get
The Innoflame X 19 23-Inch Electric Fireplace Insert is an electric insert with a 1,400-watt heater, which works out to about 4,777 BTU per hour (3.412 BTU per watt).
At 1,400 watts it uses about 1.4 kWh an hour on high and draws 11.7 amps at 120 volts; keep it on a circuit without other big loads. Price it at your electricity rate.
The maker says it heats up to 400 square feet; as with any 120-volt heater, read that as supplemental heat for one room.
The listing states 4 flame settings, and like most electric fireplaces the flame can run with the heat off.
As an insert it slides into an existing fireplace opening; measure the opening width, height and depth against the body dimensions, and the face against the trim. How to measure.
Because nothing burns, there's no chimney, vent or carbon monoxide to plan for.
Also on the listing: overall dimensions of 5 in (D) x 24 in (W) x 19.8 in (H), a shipping or unit weight of 18.1 lb and metal, tempered glass construction.
Warranty, per the listing: 1 year manufacuturer.
The figures, from the maker
Each figure is the maker's or the listing's own, with its source marked. A figure the maker doesn't give is shown as not stated.
| Model number | X 19 | Retailer |
|---|---|---|
| Power | Corded Electric | Retailer |
| Dimensions (seller) | 5"D x 24"W x 19.8"H | Retailer |
| Material | Metal, Tempered Glass | Retailer |
| Mounting / installation | Recessed | Retailer |
| Features (seller) | Adjustable Flame, Adjustable Thermostat, Overheat Protection, Safety Shut Off, Timer | Retailer |
| Batteries | 2 AAA batteries required. | Retailer |
| Product weight | 18.1 lb | Retailer |
| Model name | NT23V09M-MT1 | Retailer |
| Warranty | 1 year manufacuturer. | Retailer |
| Heats up to (maker) | 400 sq ft | Retailer |
| Wattage | 1,400 W | Retailer |
| Flame effects | 4 | Retailer |
| Thermostat | built-in thermostat | Retailer |
Is it the right heater for the room?
Pick it when
- Converting an unused fireplace
- Rooms where gas or wood can't go
Pass on it when
- Heating a whole house
- Circuits already near their limit
Where it wins, where it gives ground
Wins
- 4,777 BTU/h of heat
- No vent or chimney
- Flame runs without heat
- 4 flame settings
Gives ground
- Supplemental heat only
- Draws 11.7 A on high
Know before you install
- Figures are the maker's own and are rated in the maker's conditions. Installation, venting, chimney, gas and electrical work follow the manual and local code, carried out by a qualified installer.
Heaters to weigh against it
Other electric fireplaces and stoves in the same heat range
Buying this model
The button opens this exact model's listing. Prices and stock change, and installation parts are usually sold separately; check the box contents and the manual's venting list before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure
Questions about this model
How much heat does the Innoflame X 19 23-Inch Electric Fireplace Insert give?
Can the Innoflame X 19 23-Inch Electric Fireplace Insert share a circuit?
Bottom line
Best suited to converting an unused fireplace.