Electric stove · Comfort Glow

Comfort Glow EQS130 Electric Stove Heater

Electric stove, 1,500 W

Heat output (maker)
4,600 BTU/h
Fuel
Electric, Wood
Wattage
1,500 W
Thermostat
Thermostat
Product weight
23 lb
Warranty
1 year manufacturer limited.
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

In short

Built for A stove look without a chimney.

Wins
5,118 BTU/h of heat.
Gives ground
Supplemental heat only.
Suits
A stove look without a chimney.

Updated October 2026

What you get

The Comfort Glow EQS130 Electric Stove Heater is an electric stove with a 1,500-watt heater, which works out to about 5,118 BTU per hour (3.412 BTU per watt).

At 1,500 watts it uses about 1.5 kWh an hour on high and draws 12.5 amps at 120 volts; keep it on a circuit without other big loads. Price it at your electricity rate.

Like most electric fireplaces the flame effect can run with the heater off, using far less power.

Its stove shape sits on the floor anywhere near an outlet, with no vent or chimney.

Because nothing burns, there's no chimney, vent or carbon monoxide to plan for.

Also on the listing: a shipping or unit weight of 23 lb.

Warranty, per the listing: 1 year manufacturer limited.

The figures, from the maker

Each figure is the maker's or the listing's own, with its source marked. A figure the maker doesn't give is shown as not stated.

Model numberEQS130Retailer
Features (seller)Heat ResistantRetailer
PowerelectricRetailer
Heat output (maker)4,600 BTU/hRetailer
FuelElectric, WoodRetailer
Product weight23 lbRetailer
Warranty1 year manufacturer limited.Retailer
Width20 inRetailer
Wattage1,500 WRetailer
ThermostatThermostatRetailer

Is it the right heater for the room?

Pick it when

  • A stove look without a chimney
  • Rooms where gas or wood can't go

Pass on it when

  • Heating a whole house
  • Circuits already near their limit

Where it wins, where it gives ground

Wins

  • 5,118 BTU/h of heat
  • No vent or chimney
  • Flame runs without heat

Gives ground

  • Supplemental heat only
  • Draws 12.5 A on high

Know before you install

  • Figures are the maker's own and are rated in the maker's conditions. Installation, venting, chimney, gas and electrical work follow the manual and local code, carried out by a qualified installer.

Heaters to weigh against it

Other electric fireplaces and stoves in the same heat range

Every electric fireplaces and stoves on one chart · All Comfort Glow models listed

Buying this model

The button opens this exact model's listing. Prices and stock change, and installation parts are usually sold separately; check the box contents and the manual's venting list before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions about this model

How much heat does the Comfort Glow EQS130 Electric Stove Heater give?
About 5,118 BTU per hour on its 1,500-watt setting, since each watt gives 3.412 BTU per hour.
Can the Comfort Glow EQS130 Electric Stove Heater share a circuit?
It draws about 12.5 amps at 120 volts on high, most of a 15-amp circuit; the manual says how to connect it.

Bottom line

Built for A stove look without a chimney.