Electric stove ยท Electactic

Electactic S230B Electric Stove Heater

Electric stove, 1,500 W

Heats up to (maker)
500 sq ft
Heat output (maker)
5,100 BTU/h
Wattage
1,500 W
Flame effects
4
Material
Cast Iron
Dimensions (seller)
10.7"D x 23.5"W x 24.3"H
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

In short

Built for A stove look without a chimney.

Wins
5,118 BTU/h of heat.
Gives ground
Supplemental heat only.
Suits
A stove look without a chimney.

Updated October 2026

What you get

The Electactic S230B Electric Stove Heater is an electric stove with a 1,500-watt heater, which works out to about 5,118 BTU per hour (3.412 BTU per watt).

On a 120-volt outlet that draws about 12.5 amps, most of a standard 15-amp circuit, so other loads on the circuit can trip the breaker. Plug it straight into the wall as the manual directs.

The maker says it heats up to 500 square feet; as with any 120-volt heater, read that as supplemental heat for one room.

The listing states 4 flame settings, and like most electric fireplaces the flame can run with the heat off.

Its stove shape sits on the floor anywhere near an outlet, with no vent or chimney.

Because nothing burns, there's no chimney, vent or carbon monoxide to plan for.

Also on the listing: overall dimensions of 10.7 in (D) x 23.5 in (W) x 24.3 in (H), a shipping or unit weight of 33.3 lb and cast iron construction.

Warranty, per the listing: 1 year.

The figures, from the maker

Each figure is the maker's or the listing's own, with its source marked. A figure the maker doesn't give is shown as not stated.

Model numberS230BRetailer
PowerElectricRetailer
Dimensions (seller)10.7"D x 23.5"W x 24.3"HRetailer
MaterialCast IronRetailer
Mounting / installationFreestandingRetailer
Heat output (maker)5,100 BTU/hRetailer
Features (seller)Adjustable Flame, Flame Effect, Infrared, Overheat Protection, SmokelessRetailer
Model nameelectric fireplace heaterRetailer
Warranty1 year.Retailer
Product weight33.3 lbRetailer
Heats up to (maker)500 sq ftRetailer
Wattage1,500 WRetailer
Flame effects4Retailer

Is it the right heater for the room?

Pick it when

  • A stove look without a chimney
  • Rooms where gas or wood can't go

Pass on it when

  • Heating a whole house
  • Circuits already near their limit

Where it wins, where it gives ground

Wins

  • 5,118 BTU/h of heat
  • No vent or chimney
  • Flame runs without heat
  • 4 flame settings

Gives ground

  • Supplemental heat only
  • Draws 12.5 A on high

Know before you install

  • Figures are the maker's own and are rated in the maker's conditions. Installation, venting, chimney, gas and electrical work follow the manual and local code, carried out by a qualified installer.

Heaters to weigh against it

Other electric fireplaces and stoves in the same heat range

Every electric fireplaces and stoves on one chart

Buying this model

The button opens this exact model's listing. Prices and stock change, and installation parts are usually sold separately; check the box contents and the manual's venting list before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions about this model

How much heat does the Electactic S230B Electric Stove Heater give?
About 5,118 BTU per hour on its 1,500-watt setting, since each watt gives 3.412 BTU per hour.
Can the Electactic S230B Electric Stove Heater share a circuit?
It draws about 12.5 amps at 120 volts on high, most of a 15-amp circuit; the manual says how to connect it.

Bottom line

Built for A stove look without a chimney.