FlueencyWood, pellet, gas and electric heat, sized to your room.
Canyon Lodge C110 Wood Stove

Photo: Canyon Lodge

Wood stove · Canyon Lodge

Canyon Lodge C110 Wood Stove

Wood stove, up to 2,500 sq ft, 58,030 BTU/h

Heats up to (maker)
2,500 sq ft
Heat output (maker)
58,030 BTU/h
Fuel
Wood
Flue size
6-inch
Dimensions (seller)
28.23"D x 22.76"W x 32.95"H
Product weight
372.6 lb
Prices change often; the button shows today's price.
Check price on Amazon

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

In short

Best suited to large open-plan homes.

Wins
Heats up to 2,500 sq ft (maker).
Gives ground
Needs a chimney and clearances per the manual.
Suits
Large open-plan homes.

Updated October 2026

What you get

The Canyon Lodge C110 Wood Stove is a wood stove that its maker rates at 58,030 BTU per hour and says heats up to 2,500 square feet.

In EPA's terms this is a large heater. If the space it will sit in is much smaller than 2,500 square feet, look at a smaller model so it can burn at a healthy rate; the calculator lists the closest fits.

It connects to a 6-inch flue; the pipe and any liner should match that collar as the installation manual sets out. Stove pipe basics explains the parts.

A wood stove keeps working when the grid goes down.

Also on the listing: overall dimensions of 28.23 in (D) x 22.76 in (W) x 32.95 in (H) and a shipping or unit weight of 372.6 lb.

Warranty, per the listing: 5 Year Limited.

The figures, from the maker

Each figure is the maker's or the listing's own, with its source marked. A figure the maker doesn't give is shown as not stated.

Model numberC110Retailer
Dimensions (seller)28.23"D x 22.76"W x 32.95"HRetailer
Product weight372.6 lbRetailer
Heat output (maker)58,030 BTU/hRetailer
Warranty5 Year LimitedRetailer
FuelWoodRetailer
Mounting / installationFreestandingRetailer
Heats up to (maker)2,500 sq ftRetailer
Flue size6-inchRetailer

Is it the right heater for the room?

Pick it when

  • Large open-plan homes
  • Homes with a wood supply
  • Heat during power cuts

Pass on it when

  • Homes without room for a chimney or chimney pipe
  • Owners who want thermostat control

Where it wins, where it gives ground

Wins

  • Heats up to 2,500 sq ft (maker)
  • 58,030 BTU/h output
  • Works without electricity

Gives ground

  • Needs a chimney and clearances per the manual
  • Burns best on dry wood only
  • Hand loading every few hours

Know before you install

  • Figures are the maker's own and are rated in the maker's conditions. Installation, venting, chimney, gas and electrical work follow the manual and local code, carried out by a qualified installer.

Heaters to weigh against it

Pleasant Hearth HWS-1200-B 1,800 Sq Ft Wood StoveHeats up to 1,800 sq ft.
Cleveland Iron Works H110 Wood StoveHeats up to 2,500 sq ft.
Ashley Hearth AW2520E-P 2,500 Sq Ft Wood StoveHeats up to 2,500 sq ft.

Other wood stoves and inserts in the same heat range

Every wood stoves and inserts on one chart · All Canyon Lodge models listed

Buying this model

The button opens this exact model's listing. Prices and stock change, and installation parts are usually sold separately; check the box contents and the manual's venting list before you order.

Prices change often; the button shows today's price.
Check price on Amazon

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions about this model

How big an area does the Canyon Lodge C110 Wood Stove heat?
The maker says up to 2,500 square feet. Treat that as a ceiling for an open, insulated space and measure the area around the stove.
Does the Canyon Lodge C110 Wood Stove need electricity?
Not to burn. Wood stoves heat by radiation and convection without power.

Bottom line

Best suited to large open-plan homes.