Freestanding · Dimplex

Dimplex XHD26L Electric Fireplace

Freestanding, 1,500 W

Heat output (maker)
5,118 BTU/h
Wattage
1,500 W
Material
Metal
Dimensions (seller)
7.5"D x 26"W x 18.63"H
Product weight
29.8 lb
Warranty
1 yr limited.
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

In short

Built for renters and apartments.

Wins
5,118 BTU/h of heat.
Gives ground
Supplemental heat only.
Suits
Renters and apartments.

Updated October 2026

What you get

The Dimplex XHD26L Electric Fireplace is a freestanding with a 1,500-watt heater, which works out to about 5,118 BTU per hour (3.412 BTU per watt).

Its 1,500 watts means 12.5 amps on a household outlet and 1.5 kWh for each hour on high. The fuel cost calculator turns that into your hourly cost.

Like most electric fireplaces the flame effect can run with the heater off, using far less power.

It stands on its own and plugs into a nearby outlet; no vent or chimney is involved.

No combustion means no venting, no gas line and no carbon monoxide, which is why they go into bedrooms and apartments.

Also on the listing: overall dimensions of 7.5 in (D) x 26 in (W) x 18.63 in (H), a shipping or unit weight of 29.8 lb and metal construction.

Warranty, per the listing: 1 yr limited.

The figures, from the maker

Each figure is the maker's or the listing's own, with its source marked. A figure the maker doesn't give is shown as not stated.

Model numberXHD26LRetailer
PowerElectricRetailer
Dimensions (seller)7.5"D x 26"W x 18.63"HRetailer
MaterialMetalRetailer
Mounting / installationBuilt InRetailer
Heat output (maker)5,118 BTU/hRetailer
Features (seller)Multi-Fire Firebox, LED Flame EffectRetailer
Batteries2 AA batteries required. (included)Retailer
Model nameMulti-Fire XHDRetailer
Warranty1 yr limited.Retailer
Product weight29.8 lbRetailer
Wattage1,500 WRetailer

Is it the right heater for the room?

Pick it when

  • Renters and apartments
  • Rooms where gas or wood can't go

Pass on it when

  • Heating a whole house
  • Circuits already near their limit

Where it wins, where it gives ground

Wins

  • 5,118 BTU/h of heat
  • No vent or chimney
  • Flame runs without heat

Gives ground

  • Supplemental heat only
  • Draws 12.5 A on high

Know before you install

  • Figures are the maker's own and are rated in the maker's conditions. Installation, venting, chimney, gas and electrical work follow the manual and local code, carried out by a qualified installer.

Heaters to weigh against it

Other electric fireplaces and stoves in the same heat range

Every electric fireplaces and stoves on one chart · All Dimplex models listed

Buying this model

The button opens this exact model's listing. Prices and stock change, and installation parts are usually sold separately; check the box contents and the manual's venting list before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions about this model

How much heat does the Dimplex XHD26L Electric Fireplace give?
About 5,118 BTU per hour on its 1,500-watt setting, since each watt gives 3.412 BTU per hour.
Can the Dimplex XHD26L Electric Fireplace share a circuit?
It draws about 12.5 amps at 120 volts on high, most of a 15-amp circuit; the manual says how to connect it.

Bottom line

Built for renters and apartments.